Fall Protection in Ontario: What Are the Main Safety Guidelines?

Ontario

To reduce the risks of injuries or fatal accidents, it is crucial to equip yourself with a good fall protection system in Ontario.

The industrial and construction sectors are the largest victims of accidents at height and represent 26% of all work-related accidents, all sectors combined. With such a high percentage, it is therefore of the utmost importance to use all the prevention methods at our disposal to prevent an accident.

We have all been the victims of a fall—at work or at home—caused by a lack of precaution. The experts in prevention and safety for work at height from Delta Prevention therefore offer you a few safety guidelines to reduce your risks.

When to install a fall protection system in Ontario?

According to the regulations for work at height in Ontario, a fall protection system must be installed each time workers have to work more than 3 metres (10 feet) from the ground. Although this distance may seem minimal, an ounce of prevention is worth a pound of cure. It would be tragic to see a worker get hurt because the necessary equipment was not in place.

What equipment to use?

There are many types of fall protection equipment in Ontario. What you will use for your work varies according to:

  • the frequency of the work
  • the work to be performed
  • the work area.

Here are the main ones.

Guardrails

Guardrails can be installed permanently on the structure of a roof. This helps protect the workers who perform maintenance work. Guardrail systems can also be freestanding, which allows workers to move them and easily install them wherever they are required.

Without a doubt, these guardrail systems are the safest equipment for work at height. Consider investing in a freestanding guardrail system to reduce the risks of falling.

An extension ladder stabilizer

Another way to protect workers is to use an extension ladder stabilizer. Accidents related to falls from ladders are more common and numerous than you might think. By using a stabilizer, you give your workers the chance to have safe and direct access to roofs accessible via an extension ladder.

Fall protection in Ontario: safety harnesses

In addition to guardrails and ladder stabilizers, we strongly recommend using safety harnesses for work at height. A good system of anchor point, fasteners, cords, and harnesses helps prevent injuries. It also allows workers to avoid dangerous ledges.

Training and awareness

Worker training and awareness is also essential to ensure the safety of your workers. Furthermore, here is what the regulation in Ontario for work at height stipulates.

“An employer shall ensure that a worker who may use a fall protection system is adequately trained in its use and given adequate oral and written instructions by a competent person.”

Regular maintenance of your fall protection equipment in Ontario

Finally, our last safety guideline is to inspect your fall protection equipment as regularly as possible. You can prevent many accidents simply by keeping a watchful eye and performing regular maintenance on your equipment.

If you need more information about fall protection in Ontario, contact us by email at info@deltaprevention.com. Our team of experts will be happy to guide you.

Share

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
fall protection railing, roof fall protection, Standards

Tags