Delta Prevention’s roof crossover bridge allows you to step over pipes, parapets or level changes that are present on your roof. Made in Canada and designed to be assembled without any welding, Delta Prevention’s crossover platforms will make traffic on your roof safer while increasing productivity.
Our roof fall protection products are certified by an independent engineering firm and comply with the loads specified in article 4.1.5.14 of the NBC and OSHA standards.
With our patented recycled rubber counterweight base and aluminum components, our system offers ultimate resistance to rust and deterioration.
Our eco-responsible products are 100% designed and manufactured in Canada.
Peace of mind thanks to the best warranty on the market.
A crossover bridge platform makes it possible to safely cross gas pipes, electrical cables, HVAC ducts, low walls and other industrial equipment. A crossover bridge platform will also make navigation between the different roof levels safer and protect your equipment from accidental damage.
Going over obstacles is much more productive than around. It’s also safer to walk on a platform than attempt to jump over the obstacle. Our modular roof crossover platform design can adapt to most roof obstacles. For example, a simple 24” high by 40” long roof crossover platform as pictured above will make circulation around gas line or low parapet wall much easier and safer.
If the goal is the creation a safe pathway between two roof levels, our non-penetrating crossover platform will be ideal. Safer to use than a ladder and much simpler to deploy, our crossover bridge platform system can adapt to height differences of up to 60”. Our system uses ballasted base to increase stability.
Increase productivity while protecting employees and equipment by improving access to hard-to-reach places with a crossover platform. A crossover platform allows a worker to safely cross obstacles instead of having to go around or through them. A well-positioned crossover platform can also protect equipment from damage caused by foot traffic, reducing maintenance costs and unproductive downtime.
Choosing the right crossover bridge platform. You will need to determine the 2 important measurements of the obstacle to be cleared: the overall length and height. Then, we can choose together from our standard models or, if necessary, design a custom-made crossover platform.
A permanent fall protection solution that ensures safety for all users without PPE or annual certification.
| Step width: | 32” (812.8 mm) |
| Overall width: | 54.75” (1390 mm) |
| Step depth: | 10” (254 mm) |
| Distance between steps: | 7.5” (190.5 mm) |
| Maximum height (ground to platform): | 72” (1828.8 mm) |
| Maximum platform length: | 60” (1524 mm) |
| Step – material: | Aluminium 5052-H32 |
| Stringer- material: | Aluminium 5052-H32 |
| Hardware – material: | Stainless steel 18-8 SS |
| Counterweight – material : | recycled rubber, galvanized iron |
| Connectors – material: | Malleable Cast Iron with Hot-Dip Galvanizing & Electroplating |
| Posts and railing – material: | Anodized aluminum 6061-T6 |
| Posts and railing – diameter: | 1.9″ O.D. |
| Capacity – platform: | Tested up to 2235 lb |
| Capacity – steps (vertical linear load): | Tested up to 580 lb |
A rooftop crossover bridge provides a safe access path for passing over rooftop parapets, ductwork, changes in roof elevation and other rooftop obstacles. It ensures a safe passage for maintenance workers, enhancing overall safety in rooftop operations and maintenance tasks.
It enables safe navigation across different roof levels and shields equipment from accidental damage, enhancing overall workplace safety and efficiency.
Platforms or runways exceeding 4 feet in height require guardrails; OSHA prohibits substitutes such as chains. Crossover platforms must match stair width and not exceed 30 inches in depth.
You need to ensure the ongoing effectiveness of rooftop safety solutions through regular inspections. Typically conducted before and after winter, these assessments are crucial for maintaining product integrity.
Tell us about your project! Our technical team will contact you in 24-48 hours.
Delta Prevention is the first manufacturer to offer you a collective and eco-conscious fall protection system. Our products are made of recycled rubber from clean energy using locally sourced materials.
