The VSS SafetyLine is a warning line systems used to delimit a visual safety perimeter between work zones at height. The VSS SafetyLine is 100 % compliant with provincial standards and OSHA permanent warning line standards.
Bump lines and warning barriers are installed to prevent falls by alerting workers to fall hazards. The fall protection standards require companies to set up bump lines around the work area at least 6 feet 6 inches (2 metres) from unprotected edges.
Our roof fall protection products are certified by an independent engineering firm and meet NBC and OSHA standards.
With our patented recycled rubber counterweight base and aluminum components, our system offers ultimate resistance to rust and deterioration.
Our eco-responsible products are 100% designed and manufactured in Canada.
Peace of mind thanks to the best warranty on the market.
Obviously, your needs will change over time. That’s why we’ve developed a warning line systems that can easily be converted to a roof guardrail with 100 % shared components. By replacing steel cables with our traditional aluminum tubes, we are transforming visual protection into complete fall protection for a fraction of the cost!
In this configuration, the VSS SafetyLine have one base per vertical post. The posts at the corners and at the ends of the bump line must have two bases. The maximum spacing between two posts of the bump line is 8′ and two yellow nylon flag is supplied per 8′ section of cable. This is the configuration of the bump line according to the RSST.
In this configuration, the VSS SafetyLine must have one base per vertical post and the maximum spacing between two posts is 25′. This is the configuration of the bump line according to the OSHA (The Occupational Safety and Health Administration of United States Department of Labor).
To eliminate rust, inevitable with a steel base, or the risk of breakage of a concrete base, our warning line systems use an eco-friendly and patented recycled rubber base. Extremely resistant to shock and temperature changes, these 50 lb bases provide maximum grip on all types of flat roofs.
Maintaining the integrity of the waterproof membrane is essential to protect the building envelope. That’s why the VSS SafetyLine warning line systems is freestanding: its base acts as a counterweight, enabling it to comply with the permanent warning line standards.
Maximum distance between poles : | 96″ |
Maximum length – start / end of line: | 96″ |
Maximum cable height allowed: | 39″ from the ground |
Minimum cable height allowed: | 34″ from the ground |
Cable- Material : | steel, yellow nylon coating |
Cable- Diameter | ¼” |
Flag – Material | yellow nylon |
Maximum distance between each flag: | 72″ |
Counterweight : | 50 lb/base |
Counterweight – Material : | recycled rubber, galvanized iron |
Railing and posts : | Anodized aluminum 6061-T6 |
Outside diameter | 1,9″ |
Fittings – Material : | galvanized steel |
Hardware / Material : | stainless steel |
Tightening Torque : | 30 lb/pi (CL201: 20 lb/pi) |
Use : | permanent, temporary |
Design patent : | #162630 |
Warranty : | 10 years |
Complies with : | RSST 354.1 and OSHA: 1926.502(f) |
# ITEM : GA167-01
Material : galvanized steel
This dual connector connects two straight sections of a warning line.
# ITEM : GA168-01
Material : galvanized steel
This connector connects two warning line sections and creates a 90° corner.
# ITEM : GA173-01
Material : galvanized steel
This connector is used at the beginning and end of each permanent warning line. It can be installed on an independent vertical pole or on a Delta Prevention guardrail section.
Tell us about your project! Our technical team will contact you in 24-48 hours.
Delta Prevention is the first manufacturer to offer you a collective and eco-conscious fall protection system. Our products are made of recycled rubber from clean energy using locally sourced materials.