Crossover Platform

Delta Prevention’s crossover platforms allow you to step over pipes, parapets or level changes that are present on your roof. Made in Canada and designed to be assembled without any welding, Delta Prevention’s crossover platforms will make traffic on your roof safer while increasing productivity.

Features:

  • Manufactured in aluminum
  • 100% non-penetrating
  • Ballasted for lateral stability
  • Standard width: 32”
  • Step depth: 10”
  • Step with non-slip surface
  • Mechanically bolted assembly without welding
  • Made in Canada

Respect all standards

Our roof fall protection products are certified by an independent engineering firm and meet NBC and OSHA standards.

Designed to last

With our patented recycled rubber counterweight base and aluminum components, our system offers ultimate resistance to rust and deterioration.

made in canada

Made in Canada

Our eco-responsible products are 100% designed and manufactured in Canada.

best warranty Guardrail system in Hamilton

10 year warranty

Peace of mind thanks to the best warranty on the market.

Where to install a crossover platform?

A crossover platform makes it possible to safely cross gas pipes, electrical cables, HVAC ducts, low walls and other industrial equipment. A crossover platform will also make navigation between the different roof levels safer and protect your equipment from accidental damage.

Crossover Platform for Obstacle on a Single Roof Level

Going over obstacles is much more productive than around. It’s also safer to walk on a platform than attempt to jump over the obstacle. Our modular crossover platform design can adapt to most roof obstacles. For example, a simple 24” high by 40” long crossover platform as pictured above will make circulation around gas line or low parapet wall much easier and safer.

Crossover Platform for Different Roof Levels

If the goal is the create a safe pathway between two roof levels, our non-penetrating crossover platform will be ideal. Safer to use than a ladder and much simpler to deploy, our crossover platform system can adapt to height differences of up to 60”. Our system uses ballasted base to increase stability.

Why install a crossover platform?

Increase productivity while protecting employees and equipment by improving access to hard-to-reach places with a crossover platform. A crossover platform allows a worker to safely cross obstacles instead of having to go around or through them. A well-positioned crossover platform can also protect equipment from damage caused by foot traffic, reducing maintenance costs and unproductive downtime.

How to choose a crossover platform?

Choosing the right crossover platform. You will need to determine the 2 important measurements of the obstacle to be cleared: the overall length and height. Then, we can choose together from our standard models or, if necessary, design a custom-made crossover platform.

Choose a collective and permanent protection

A permanent fall protection solution that ensures safety for all users without PPE or annual certification.
A technical drawing showing a crossover stair system with counterweights

Why choose a Delta Prevention crossover platform?

  • Aluminum: Delta Prevention crossover platforms are designed in aluminum to prevent corrosion and to facilitate and speed up handling during installation.
  • Modular: designed without any welding, the Delta Prevention crossover platforms are shipped disassembled to limit costs and make it easier to climb onto the roof. They assemble quickly with basic tools and can be easily disassembled and reassembled as needed.
  • Compliance with North American standards.
  • Made in Canada.

Technical Data Sheet – Crossover Platform System

Step width:32” (812.8 mm)
Overall width:54.75” (1390 mm)
Step depth:10” (254 mm)
Distance between steps:7.5” (190.5 mm)
Maximum height (ground to platform):72” (1828.8 mm)
Maximum platform length:60” (1524 mm)
Step – material:Aluminium 5052-H32
Stringer- material:Aluminium 5052-H32
Hardware – material: Stainless steel 18-8 SS
Counterweight – material :recycled rubber, galvanized iron
Connectors – material: Electro-plated galvanized steel
Posts and railing – material: Anodized aluminum 6061-T6
Posts and railing – diameter:1.9″ O.D.
Capacity – platform:Tested up to 2235 lb
Capacity – steps (vertical linear load): Tested up to 580 lb
  
  
  
  

QUOTE REQUEST

Tell us about your project! Our technical team will contact you in 24-48 hours.

Delta Prevention is the first manufacturer to offer you a collective and eco-conscious fall protection system. Our products are made of recycled rubber from clean energy using locally sourced materials.