Ladder Stabilizer System for Roof

Delta Prevention’s Ladder stabilizer system for roof is designed to create safe access to roofs accessible by an extension ladder. The versatile and patented system can be installed without anchoring in a few minutes on flat roofs with or without a parapet.

Ladder Roof Stabilizer Features:

  • Patent Pending
  • 100% non-penetrating
  • For roofs with or without parapet
  • Lightweight, rust resistant aluminum pipes
  • Steel stabilizer with anti-corrosion powder coating
  • Quick and easy installation
  • Permanent or temporary installation
  • Made in Canada

Respect all standards

Our roof fall protection products are certified by an independent engineering firm and comply with the loads specified in article 4.1.5.14 of the NBC and OSHA standards.

Designed to last

With our patented recycled rubber counterweight base and aluminum components, our system offers ultimate resistance to rust and deterioration.

made in canada

Made in Canada

Our eco-responsible products are 100% designed and manufactured in Canada.

best warranty Guardrail system in Hamilton

10 year warranty

Peace of mind thanks to the best warranty on the market.

Improve safety around extension ladders

Preventing falls when using extension ladders is essential. Each year, thousands of Canadians injure themselves by climbing an inadequately secured extension ladder. The Ladder roof stabilizer system prevents the ladder from sliding along the parapet and eliminates the need to secure it with a bungee cord or rope. 100% non-penetrating, the Ladder stabilizer system for roof is a versatile equipment that adapts to all flat roofs.

Fall from non stabilized ladder

Stabilizes the Extension Ladder

No more risk of sliding. The extension ladder is stabilized by the hooks compatible with ladders with round or in “D” shaped rungs up to 2″ in diameter.

Using a ladder safely with a extension ladder access port

Guides the worker

The hoops offer a solid grip at the end of the ladder and the 10′ guardrail system guide the worker towards the center of the roof.

Ladder stabilizer system for HVAC Maintenance

The Ladder stabilizer system is designed to make access to the roof safer during the maintenance of HVAC units. Because it installs quickly and without anchoring to the roof, the Ladder stabilizer system can be installed and left on the roof of the building permanently. The Ladder roof stabilizer system holds the extension ladder firmly in place and makes each visit to the roof safer.

Ladder stabilizer system for roof on Construction Site

On a construction site, it is the responsibility of the general contractor to provide a safe access point to the roof for all subcontractors on the job site. The Ladder stabilizer system eliminates the time lost and wasted material associated with the fabrication of wooden railings at the exit of the ladders. Durable and reusable on all job sites, it adapts to all types of flat roofs and can be installed in a few minutes.

Ladder stabilizer system: a complete system

The Ladder stabilizer system (# LADPT1) is fitted with hooks compatible with ladders with round or “D” rungs up to 2″ in diameter. The hoops offer a solid grip at the arrival on the roof. The 10’ guardrail guide the worker toward the centre of the roof. Contact us to determine if the Ladder Stabilizer is best suited to your situation!
Le stabilisateur d'échelle coulissante s'installe sur les toits avec ou sans parapet

Ladder stabilizer system

  • ITEM # LADPT1

Best Use :

  • Permanent or temporary installation
  • For application where the extension ladder is in replacement of a fixed ladder
  • On roof with or without parapet
The versatile ladder access port stabilizer clamps on the parapet

Clamp-on Installation :

  • The adjustable clamp and adjustment screw allow precise installation on the parapet.
  • For #LADPT1 or #LADPT2

Support Point Installation :

  • The clamp turns into a support point on roofs without a parapet wall.
  • For #LADPT1 only

Technical Data Sheet – Ladder roof stabilizer system

Total length 145″
Height 42″
Interior width – entry 23″
Interior width – exit 28″
Parapet – maximum width 12″
Parapet – maximum height 24″*
Parapet – minimum width 6″
Material – stabilizer Powder coated steel with e-coat
Material – guardrail Anodized aluminum
Material – counterweights Recycled rubber, Galvanized cast iron
Weight – counterweights 200 lb
Weight – total 337.5 lb
Ladder – compatibility Aluminum, fiberglass
Ladder – compatible rung Round, “D” shaped
Ladder – Maximum rung diameter 2″
Ladder – minimum inside width 12″
Ladder – maximum side rail width 4″

* For a parapet higher than 24″, contact our customer service.

Accessories – Ladder stabilizer system for roof

Self-closing safety gate

# ITEM : GAT24A02
Material: Aluminium

The self closing safety gate protects the access points on the roof, such as ladders or access hatches. Mounted on springs, it closes automatically after use. The self closing safety safety gate is adjustable from 24“ to 36”.

A ladder stabilizer is designed to increase ladder safety and ensure secure roof access via extension ladders. It can be used on flat roofs, with or without a parapet, without the need for anchoring.

The hooks stabilize extension ladders with round or “D” shaped rungs up to 2 inches in diameter.

A ladder stabilizer is essential for fall prevention. It stops the ladder from sliding along the parapet and eliminates the need to secure it with a bungee cord or rope.

Our 100% non-penetrating rooftop fall protection system prevents any damage to shingles while providing ladder stability.

QUOTE REQUEST

Tell us about your project! Our technical team will contact you in 24-48 hours.

Delta Prevention is the first manufacturer to offer you a collective and eco-conscious fall protection system. Our products are made of recycled rubber from clean energy using locally sourced materials.