ITEM # HGKTSF01
The roof hatch safety rails protects access to the hatch, often installed at the edge of the roof. This fall protection railing also prevents falls in the hatch when it is left open.
Our roof fall protection products are certified by an independent engineering firm and comply with the loads specified in article 4.1.5.14 of the NBC and OSHA standards.
With our patented recycled rubber counterweight base and aluminum components, our system offers ultimate resistance to rust and deterioration.
Our eco-responsible products are 100% designed and manufactured in Canada.
Peace of mind thanks to the best warranty on the market.
ITEM # HGKTSF01
ITEM # HGKTOS01
The life of your employees and contractors is based on your fall prevention system: it must withstand years of bad weather. Therefore, the roof hatch safety rails uses unique materials from the industry to offer you the best protection for life.
Designed to secure traffic around roof access hatches, the roof hatch safety rails developed by Delta Prevention perfectly adapts to the majority of hatches. Equipped with a self-closing adjustable fence, the roof hatch safety rails makes access to the descent secure at all times. As the hatches are often installed close to the ledge, the safety lock built into the hatch assembly helps prevent roof falls when leaving the hatch.
Thanks to the design developed in-house exclusively for this application, the Delta Prevention’s access hatch guardrail kit can be easily installed on access hatches of all style and size. The clamp-on installation is safe for the membrane and is 100% perforation-free. The same clamp also allows for bolted installation if necessary.
| Overall length : | 78″ |
| Guardrail height : | 42″ |
| Overall width : | 60.55″ |
| Depth landing zone : | 24″ |
| Railing and vertical posts : | Anodized aluminium 6061-T6 |
| Railing and vertical posts – outside diameter : | 1,9″ |
| Fittings – material: | Malleable Cast Iron with Hot-Dip Galvanizing & Electroplating |
| Hardware: | stainless steel |
| Tightening torque: | 30 lb/pi (GA201: 20 lb/pi) |
| Use : | permanent |
| Complies with : | CNESST: 2.9.2, 3.8.2 – NBC: meets loads specified in article 4.1.5.14 – OSHA: 1926.502, 1926.501 – Ontario Building Code: 4.1.5.14 – WorkSafeBC: 11.2 |
| Warranty : | 10 years |
# ITEM : GATE24
Material: Aluminium
The security gate protects access to the roof such as ladders or access hatches. Mounted on springs, it closes automatically. The safety gate is adjustable from 22.75 “to 26.5”.
# ITEM : HGKIT-HANDLE
Material: Aluminium
The handle can be installed easily on the guardrail kit to enhance the safety when exiting or entering the ladder.
Yes, in Canada, per Canadian building standards, a roof hatch railing must be installed around any opening you need to go up or down from the roof. These rules ensure that falls from high places are as unlikely as possible.
All roof access hatches must be equipped with a roof hatch guardrail for fall protection. The standards to comply with are set by the National Building Code (NBC) and the Occupational Health and Safety Administration (OSHA)
In Canada, safety regulations require measures when there’s a risk of a worker falling approximately 3 meters (10 feet). In situations where alternative forms of protection, like guardrails, aren’t feasible or accessible, fall protection is usually mandated.
Tell us about your project! Our technical team will contact you in 24-48 hours.
Delta Prevention is the first manufacturer to offer you a collective and eco-conscious fall protection system. Our products are made of recycled rubber from clean energy using locally sourced materials.